Latest three way joint Tenders | Government three way joint Tenders

CTN :45602553

30 Jun, 2026 NA

East Sikkim - Sikkim

Tender For corrigendum : supply of oil filter 40 kva , fuel filter 40 kva , fuel filter 30 kva , oil filter 30 kva , three way joint fuel pipe , cyl head assy , avr evr 5 kva , air filter 5 kva

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

CTN :45689096

06 Jul, 2026 NA

East Sikkim - Sikkim

Tender For supply of oil filter 40 kva , fuel filter 40 kva , fuel filter 30 kva , oil filter 30 kva , three way joint fuel pipe , cyl head assy , avr evr 5 kva , air filter 5 kva

corporations/Associations/Others

CTN :45674926

01 Jul, 2026 34.16 Lacs

Multi City - Telangana

Tender For laying of 900 mm dia ms pipes and 600 mm dia rcc np3 class storm water pipeline from plot no.303-l, road no.26 to plot no.42, road no.10c, mp and mla colony, jubilee hills, for removal of water stagnation at road no.26, jubilee hills, ward-215, circle-36, khairatabad zone, ghmc (item.no 2)

CTN :45655338

27 Jun, 2026 4.16 Lacs

Vikarabad - Telangana

Tender For procurement of manholes and materials for repairs and maintance to ugd pipelines in vikarabad municipality under municipal general funds - raising of existing manholes to additional height by laying cc (1:3:6) cover bed block of clear dia 0.56m including the cost and conveyance of all materials and curing for 21 days complete all taxes seignarage charges as per specification etc complete. , phe-ljsw-13: supply, lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and spun yarn including cost and conveyance of pipe. (reference to specifications bis no. 6530/72) - 150mm dia , manufacture as per bis:12592 (part 1&2) supply & delivery of manhole covers and frames with isi marking anywhere in t.g., f.o.r. destination including, loading, un-loading & stacking at site but excluding all taxes, as applicable.i.s.i mark - h.d.-20 with 500mm dia clear opening , earthwork in excavation for pipeline trenches as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth (rbr-fndn-1 -manual means) , dismantling of cement concrete benching around the manhole frame carefully without damaging the frame and removal and refixing of manhole frame true to alignment and gradient of the road as directed by the engineer in charge including cost of labour etc. complete for finished item of work. , cutting opencc road surface (as well as asphalt concrete upto 75 mm thick ) including water bound macadam and stacking of excavated materials for pipe line trench work. as directed by the departmental officers. , construction of sewer circular conical manhole as per type design using flyash bricks of size 290 x 225 x 140 mm having minimum crushing strength 75 kgs per sqm as per is:12894-1990 - class - 7.5 using sulphete resisting cement in cm (1:6) prop; including cc (1:4:8) bed for foundation and of m15 (1:2.5:5) prop. using 20mm hg metal for benching and channels, inside plastering with 20mm thick using sulphete resisting cement in cm (1:3) prop; and outside plastering with 20mm thick using opc in cm (1:3) prop; the foundation concrete in cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block / masonary wherever necessary including finishing the gap with cm (1:3) prop. on both the sides including excavating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (hd-20) and pvc encapsulated steps including cost & conveyance of all material, labour and all other incidental and operational charges etc., complete

CTN :45632670

30 Jun, 2026 NA

Mathura - Uttar Pradesh

Tender For tender for supply of j1 8340-001116 3 way jt w base plate for tent extndbl , j1 8340-001117 four way joint for tent extndbl f supptd , j1 5110-001142 10546427 phawrah complete , j1 3750-000010 tasla basket for earth , j1 8340-001118 three way joint for r pole tent extndbl , j1 8340-000488 pin iron for tent 457 mm , j1 5120-000332 handle mamooties 915mm , j1 7110-000026 boxes mobile office

CTN :45628566

29 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For tender for supply of tentage items - j1 , 5430-016633 , clip for tent extndbl f/suptd 4m unit , j1 , 8340-001117 , four way joint for tent extndbl f/supptd , j1 , 8340-001118 , three way joint for r/pole tent extndbl , j1 , 7105-000001 , table camp mk 4 , j1 , 8340-001116 , 3 way jt w/base plate for tent extndbl , j1 , 8340-001120 , universal member for tent extndbl f/sup

Central Government/Public Sector

CTN :45326878

22 Jun, 2026 35.00 Lacs

Pune - Maharashtra

Tender For corrigendum : maintenance repair, replacement of defective external water supply pipeline and valves, control panels, miscellaneous item at tech area, omq area and np area under ge(af) lohegaon at 2 wing af stn pune

corporations/Associations/Others

CTN :45525139

15 Jun, 2026 9.61 Lacs

Multi City - Telangana

Tender For removal of water stagnation by laying of rcc pipeline at blossoms international school, nallagandla of ward no.226-nallagandla, slp cir-49, slpz, cmc.(item-01)(2nd call)

CTN :45468167

17 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of pneumatic pipe flexible , gi pipe , pneumatic filter , on off cock , air gun , adaptor , three way joint

Three Way Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others